FIRE HAZARD AND PHYSICO-MECHANICAL PROPERTIES FOR EPOXY-AMINE COMPOSITES CONTAINING THE [Cu(DETA)(H2O)]SO4·H2O FLAME RETARDANT-HARDENER

Abstract

Introduction. The rapid growth of production rates and the use of polymer materials in various fields has brought about an increase in the number of fires caused by the ignition of polymer products. Among the most common polymer materials are materials based on epoxy resins. They are used in such industries as construction, electrical engineering and radio engineering, shipbuilding, mechanical engineering, including automotive, aerospace and rocketry, etc. Due to its organic structure, high content of carbon and hydrogen, epoxy polymers are very combustible. Their combustion is characterized by high temperature and more flame propagation rate. And it is accompanied by significant smoke formation and the release of large amounts of toxic products. Therefore, the search for new ways to reduce combustibility and maintain the proper level of performance is one of the priorities in the development and implementation of new epoxy polymer materials in various fields. Purpose. The work aims to obtain epoxy-amine composites and to discover the effect of flame retardant-hardener on their fire hazard and physical and mechanical properties.
Methods. In work used Modern research methods. The flame propagation rate was determined by UL94, the coefficient of smoke was measured by ASTM E662-19, physical and mechanical properties were evaluated by measuring parameters such as surface hardness, tensile strength, water absorption and chemical resistance.
Results. The parameters of fire danger of epoxy-amine composites with different content of flame retardant (0, 5, 16 and 80 mass parts) were studied. The results of experimental studies showed that the flame propagation rate and the smoke formation coefficient in the mode of smouldering and combustion are minimal for epoxy-amine composites containing 16 and 80 mass parts of flame retardant. Such compositions have higher surface hardness and tensile strength. And they also well as more resistant to water and aggressive environments compared to unmodified ones.
Conclusion. The paper presents a simple and commercially attractive method of obtaining epoxy-amine composites con-taining different amounts of flame retardant – copper(II) sulfate. It is necessary, the obtained samples of the composites are homogeneous in structure. These should be considered as individual chemicals, not as mixtures. Chemical bonding of all components of the composites, namely the appearance of additional (compared to the unmodified composite) Cu(II)–N coordination bonds in the polymer framework DGEBA/DETA-CuSO4, is reflected in the enhanced physical and mechanical properties and fire hazard reduction for this type of composite materials.